Mobb Alternating Bubble Mattress

The Mobb Alternating Bubble Mattress is designed for the treatment and prevention of pressure sore stage 1 and in-home therapy. 

The Bubble Mattress consists of two parts: the mattress and the pump. The pump utilizes a small compressor to remain quiet and energy efficient. The control panel is simple and very user friendly. The mattress relieves pressure by sequentially deflating and inflating alternate air cells on approximately 6 minutes timed intervals. It is widely recognized that constant pressure to a bony prominence is the leading cause of skin breakdown. The continuous movement supplied by the unit lessens the areas of constant pressure and enhances circulation.

• Very easy to install
• PVC mattress is composed of 130 3" bubble cells
• Can be fixed to bed by flaps on top and bottom
• Pump can be hung to bed with two hooks
• Easy to clean
• 300lb weight capacity
• 77" x 35" x 3"

Therapeutic Pad Features:

• 130 bubble pad design
• Provides superior treatment
• Durable, Medical grade PVC
• Advance comfort therapy
• RoHS/CA-117/En-71 Certificate
• CE CB RoHs FDA cULus
• Flaps Length: 20"

Alternating Pump Features:

• Comfort design
• Reliable, durable pump
• Quiet, low vibration compressor
• Easily attaches to bed frame
• Adjustable pressure setting
• Cycle time: 6 minutes
• Air output: 6-7 L/min
• Pressure range: 40-100 mmHg
• Dimensions: 10" x 5" x 4"

Operation:

1. Place the mattress on the bed frame with the hose end at the foot section of the bed frame.
2. Using the integrated hooks, securely hang the pump on the bed end at the foot end or place on a smooth flat surface.
3. Connect the air hoses from the mattress to the pump.
4. Plug the pump into a wall outlet. Be sure the power cord is safely away from possible hazards.
5. Turn on the power switch on the control panel of the pump. The pump will begin to inflate the mattress.
6. After inflation, adjust the mattress using the dial on the pump.

Caution

• Do not smoke on or near the pump
• Keep the pump away from heated surfaces
• Explosion risk if used in the presence of flammable anesthetics
• Replace fuse as marked: T1A 250V.
• Power Input: AC 110V 60Hz, 0.1A